Raymarine ST60 Specifiche Scaricare il pdf (Pagina 24)

12 ST60 Speed Instrument Owner’s Handbook

The transducer types required for the various hull types are as follows:

Other transducer types are also available for specific requirements. For further

details, contact your local Raymarine dealer.

For accurate speed readings the transducer should be sited within the clear water

flow areas indicated by the shaded areas in the following diagram.

The transducer should also:

• Be ahead of the propellers (by a minimum of 10% of the water line length).

• Be at least 6 in (150 mm) away from the keel (ideally ahead of the keel if a sail-

ing yacht).

• Be as near as possible to the center line of the vessel.

• Be clear of other through-hull fittings or projections.

Hull material Transducer type

Glass reinforced plastic (GRP) M78712 Through hull plastic

Steel M78712 Through hull plastic

Aluminium M78712 Through hull plastic

Wood M78716 Through hull bronze

Sailing vessel

Planing power

vessel

Displacement power

vessel

Transducer siting

D4349-1

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 51 52

Nessun commento

Raymarine ST60 Specifiche Pagina 24